Getting started
- Add audio: drag files from Explorer onto a button, or click an empty button to pick files. Drop several at once and they fill that button and then the next empty ones, so nothing is overwritten.
- Play: click a button, press its hotkey, or hit its pad on a MIDI controller.
- Set it up: right-click a button to change its label, button and text colour, hotkey, play mode, fades and volume. What each button is set to shows under its name.
- Pick the output: ⚙ Settings → Output device sends everything to a soundcard or mixer input instead of the PC speakers.
Everything saves automatically, so there's no Save button to forget.
The buttons
| Q 🎹 N36 top-left | The cart's hotkey and MIDI control (N36 = note 36, CC20 = controller 20; "/2" means MIDI channel 2). |
| ❚❚ top-centre | Pause. Click to pause where it is, then click ▶ to carry on from the same spot. |
| ■ top-centre | Stop straight away, ignoring the cart's own fade-out. It also cuts a ⤵ fade short. It never starts the cart. |
| ▼ / ▲ top-centre | Music dip (only on carts with a dip button set up). ▼ drops the music to its dip level, ▲ brings it up to full. By default it only lasts while you hold the button (or set it to Latch). It's lit purple while the music is dipped. See Music dip. |
| ⤵ 2s top-centre | Fade out over that cart's own time. It never starts the cart. Right-click it to change the time (0.5–15 s presets, or type any value). |
| Toggle Out 2s under the name | How the button is set up (see Reading a button). |
| ⠿ top-right | Drag handle for moving the cart (see Banks). |
| slider along the bottom | The cart's own volume, which works live while it plays. Double-click it for 100%. On a dip cart it follows the dip down and turns purple (see Music dip). |
| 3:24 bottom-left | Length of the track. |
| ⚡ RAM / Disk next to it | Where it plays from: RAM is instant, Disk is pre-loaded and still fast, ⏳ is still loading. Hover it to see why a track isn't in RAM (see Instant playback). |
| 0:42 · -1:05 bottom-right | Time played so far, then time left. It blinks at the very end (see Track ending). Looping carts count up instead. |
Colours around a button:
green playing ·
amber fading out ·
pulsing blue paused ·
red outline audio file not found.
Track ending
Buttons warn you before a track runs out, so a bed or walk-on never stops by surprise.
| Tracks 30 s or longer | Last 15 seconds: the outline pulses amber and the progress turns amber.
Last 5 seconds: the button flashes red and the time left blinks. |
| Shorter jingles | No flashing (it would be on nearly the whole time). The progress turns amber for the last third, then red for the last 3 seconds. |
| In another bank | If the ending track is in a bank you're not looking at, that bank's tab pulses amber, then red. |
| Never warns | Looping, paused or fading carts. |
Change the 15 seconds in ⚙ Settings → End warning (0 turns it off). Raising it also raises the "long track" line: the warning never covers more than half a track.
Top bar
| Bank tabs · + | Switch bank, add a bank, drag a tab to reorder (see Banks). |
| 🔊 slider | Master volume for everything. |
| Mute | Master mute. Silences everything at once; carts keep running underneath, so when you unmute they're exactly where they would have been. Flashes red while on. Always off when Show Player opens. |
| ○ Live | Live show mode (Ctrl+L). Locks empty buttons and editing for the show; it shows ● LIVE in red while on. See Live show mode. |
| ■ Stop all | Fades everything out. Shift-click stops instantly. |
| About | Version, and a link to leejamesapps.co.uk. |
| ? | This help (F1). |
| ⚙ | Settings (see Settings). |
The bar along the bottom shows the bank, how many carts it has, and whether they're all loaded (⚡ all ready). Hover it to see how much RAM is in use. © Lee James Apps opens the website.
Live show mode
Turn it on before the show with ○ Live in the top bar (or Ctrl+L). The button turns red and reads ● LIVE.
- Empty buttons are locked out. Clicking one does nothing: no file window pops up mid-show. They go blank and faint so the wall is easier to read.
- Editing is locked too: right-click edit, dropping files onto buttons, moving buttons, adding, renaming or removing banks, and Open.
- Everything for running the show still works: playing carts by click, hotkey or MIDI, ❚❚ ■ ⤵ and the dip button, the volume sliders, switching banks, Stop all and Settings.
- Trying something that's locked shows a reminder in the status bar.
- It's saved, so if the PC restarts mid-show Show Player opens still in Live mode.
- Click ● LIVE (or Ctrl+L) again to unlock.
Reading a button
The labels under each name show how that button is set up, so you can check a whole bank at a glance:
| Toggle Pause Restart Stack Hold | Play mode, always shown (see Play modes). |
| Loop | Repeats until stopped. |
| Over all | Plays over everything, and nothing else can stop it (see Play over everything). |
| Interrupt | Pauses everything, plays, then carries on with what was playing (see Play modes). |
| Interrupt + stop | Pauses everything, plays, then stops what was playing (see Interrupt + stop). |
| In 1s | Fades in over that time when it starts. |
| Out 2s | Fades out over that time when you press it to stop. This is not the ⤵ button, which has its own time. |
| Others: fade Others: stop | What it does when another cart starts. With One at a time on, every button shows Others: fade. |
- No In / Out label = no fade. No Others label = it keeps playing.
- Hover over a button for everything in words: hotkey, play mode, fade in, fade out, what happens when another cart starts, and volume.
- For a clean wall during the show, untick Show each button's settings on it in ⚙ Settings. Hovering still works.
Playing & stopping
- Esc or ■ Stop all fades everything out (over the Stop all fade time in Settings). Shift+Esc or Shift-click stops everything instantly.
- Pressing a playing cart again stops it (in Toggle mode), using that cart's Fade out on stop time.
- ❚❚ Pause holds a cart where it is. Paused carts are left alone when other carts start, so you can pause a bed, fire a jingle, then resume the bed. Stopping a paused cart ends it straight away.
- When another cart starts (per cart, in the editor): Keep playing, Fade out or Stop instantly. Use it so a music bed ducks out automatically when a sting fires.
- One at a time (Settings) makes every new cart fade out whatever else is playing.
- Interrupt carts work differently: they pause everything instantly and hand back when they finish, so the song carries on from the same spot (see Interrupt). Interrupt + stop carts stop it dead instead (see Interrupt + stop).
- 🔊 Master volume at the top affects everything. Each cart also has its own slider.
- Closing the app while something is playing asks first.
Play modes
| Toggle (default) | Press to play, press again to stop. |
| Pause | Press to play, press again to pause, press again to carry on from the same spot. The ■ button (or Esc) stops it properly. |
| Restart | Every press starts it again from the top. |
| Stack | Every press plays another copy over the top. Good for applause, horns and FX. |
| Hold | Plays only while the mouse button or key is held down. |
| Loop | Repeats until stopped. It works with any mode. |
| Interrupt / Interrupt + stop | See below. They work with any mode. |
Music dip
For a bed under speeches, or music you want to talk over. Set Music dip button in a cart's edit window and the cart gets a ▼ / ▲ button.
- Dip: the cart plays at full. ▼ drops it to the dip level (say 30%).
- Max: the other way round. The cart starts at the dip level and ▲ brings it up to full.
- Dip level is set per cart (a loud track may need to go lower than a quiet bed).
- Dip speed and how the button works are the same for every cart, so everything moves together. Right-click any ▼ / ▲ button to change them, or use Settings:
- Down time (say 0.5 s) going down to the dip level, and Up time (say 1 s) coming back up. Coming back slower sounds more natural. Instant = no ramp.
- Press and hold (the default): the level changes only while you hold the button down, and goes back as soon as you let go. Latch: one click changes it, the next click puts it back.
- The button shows what a press does and how fast: ▼ 30% · 0.5s.
- Space bar works the dip too, on every playing cart that has a dip button (in any bank): hold it (or tap it, on Latch). It only works while Show Player is the focused window. If an older set already uses Space as a cart's hotkey, Space plays that cart instead.
- The cart's volume slider follows the level it is actually playing at: it slides down as the music dips, turns purple while dipped, and comes back up with it.
- Dragging the slider while dipped sets how loud the dip is; when it comes back up it returns to the matching full level. Double-click the slider for 100%.
- The dip works on top of the cart's volume, so 30% of a cart at 80% is 24%.
- Each time the cart starts again it begins where its setting says: full for Dip, dipped for Max.
Interrupt
Tick Interrupt in a cart's edit window for drop-ins: an announcement, an ID or a sting over a song.
- Pressing it instantly pauses everything that's playing (no fades, whatever their own settings say) and plays the interrupt straight away.
- When the interrupt ends, or you stop it, everything it paused carries on from where it was. Its own fade-out on stop finishes first.
- While they wait, those buttons show ↩ before their time and a pulsing blue outline. Pressing ❚❚/▶ on one resumes it early.
- Carts you'd already paused yourself stay paused. Anything fading out when the interrupt starts is stopped.
- An interrupt over an interrupt works too: each one hands back to the one before.
- Stop all (Esc) stops everything, including what was waiting. Nothing comes back afterwards.
- A looping interrupt carries on until you stop it.
- Hold + Interrupt: the song stays paused for as long as you hold the button, key or MIDI pad, even after the interrupt has finished. The button shows ↩ let go to resume, and the song carries on when you let go (or press its ■). A global hotkey (Show Player in the background) can't tell when you let go, so that one hands back as soon as the interrupt ends.
Play over everything
Tick Play over everything for sound effects that must land whatever else is going on: a phone ring, a doorbell, a crash over a scene.
- Pressing it never touches anything else: no fades, no stops, no pauses, even with One at a time on or another cart set to fade or stop when a cart starts.
- And nothing else touches it: starting another cart, One at a time and interrupts all leave it playing.
- Only its own button (■, ⤵, its play mode) and Stop all stop it.
- It can't also be an Interrupt: they do opposite jobs, so ticking one clears the other.
- The button shows an Over all chip.
Interrupt + stop
Tick Interrupt + stop instead when the drop-in should end the song: a last-orders call, a fire-alarm message, the walk-on that replaces the bed.
- It pauses everything instantly, just like Interrupt, but when it ends (or you stop it) what it paused is stopped dead instead of carrying on.
- While they wait, those buttons show ✕ before their time instead of ↩. Pressing ❚❚/▶ on one resumes it early, and then it's yours again.
- It stops anything an older interrupt underneath was holding too, so nothing comes back afterwards.
- With Hold the button shows ✕ let go to stop after the interrupt finishes.
- You can tick Interrupt or Interrupt + stop, not both. Ticking one clears the other.
Banks
- Banks are the tabs along the top, each with its own page of buttons. You start with two.
- + adds a bank (up to 20). ✕ on the current tab removes it, and asks first if it has carts in it.
- Rename: click ✎ on the current tab, or double-click / right-click any tab.
- Switch: click a tab, press Ctrl+1 … Ctrl+0 for the first ten, or use PageUp / PageDown.
- A green dot on a tab means something in that bank is playing. Carts keep playing when you change bank.
- Move a cart: drag its ⠿ handle (or Shift+drag the cart) onto another button to swap them, or onto a bank tab to move it to that bank's first empty button. A playing cart keeps playing while it moves.
- Reorder the banks: drag a bank tab left or right and drop it on another tab. A white line shows where it will land. Carts that are playing keep playing, and hotkeys stay with their carts.
Hotkeys
- Right-click a cart → Learn… → press any key. Clear removes it.
- ⚙ Settings → Auto-assign keys gives every cart in the bank the key in the same place on the keyboard (rows 1–0, Q–P, A–;, Z–/).
- A hotkey fires its cart even if it's in another bank. If two banks use the same key, the bank on screen wins. Within one bank, the first button with that key wins, and the editor warns you about the clash.
- Hotkeys work when Show Player isn't the focused window (Settings) lets you fire carts while working in another program. Keys another app has already claimed are listed in Settings.
- Reserved, so they can't be hotkeys: Esc, Tab, PageUp/PageDown, F1, Space (music dip), Shift, Ctrl, Alt, Windows, Caps Lock.
MIDI control
- Plug in any USB MIDI controller (pad controller, keyboard, a desk's MIDI out…). Show Player listens to all MIDI inputs unless you pick one in ⚙ Settings.
- Assign: right-click a cart → MIDI Learn… → hit the pad, key or button. Clear removes it. Notes and CC buttons both work, on any channel.
- A MIDI press does exactly what the cart's hotkey does, including its play mode. Hold carts play for as long as the pad is held.
- CC buttons press at value 64 or above and release below 64. A fader or knob therefore fires once each time it passes halfway up.
- Like hotkeys, a MIDI control fires its cart in any bank, and the bank on screen wins if two banks use the same one.
- MIDI works even when Show Player isn't the window in front.
- MIDI Stop all (Settings) gives one pad the job of the Esc key (fade everything out).
- Not seeing anything? Open ⚙ Settings and hit a pad: Last received shows what arrived and from which device. Controllers plugged in while the app is open are picked up automatically.
Editing a cart (right-click it)
| Label | Text on the button. Leave it blank to use the file name. |
| File | Browse… to change the audio. Dropping a new file onto a cart also replaces its audio but keeps its colours, key, mode and fades. |
| Colour | Button colour. The last swatch opens a picker for any colour. |
| Text colour | Colour of the name and timers on the button. Each "Aa" shows how it looks on this button's colour; the last swatch picks any colour. |
| Hotkey | See Hotkeys. |
| MIDI | See MIDI control. |
| Play mode | See Play modes. |
| When another cart starts | Keep playing / Fade out / Stop instantly. |
| Interrupt | Pressing this cart instantly pauses everything else, then carries it on when this one ends (see Interrupt). |
| Fade in | Rises from silence over this time when it starts (ms). |
| Fade out on stop | Used when you press it to stop (ms). 0 = cut dead. |
| ⤵ Fade button time | How long the cart's ⤵ button takes to fade it out. |
| Volume | The cart's level, the same as the slider on the button. |
| Music dip button | Off / Dip / Max, and the Dip level. The dip speed and hold / latch are the same for every cart (Settings, or right-click ▼). See Music dip. |
| ▶ Test | Listen without leaving the editor. |
| Remove | Empties the button. The audio file itself isn't touched. |
Settings (⚙)
| Output device | Which soundcard everything plays on. If that device is unplugged, Show Player plays on the system default and switches back when it returns. |
| Grid | Rows × columns of buttons (up to 8 × 10). Shrinking it hides the extra buttons rather than deleting them, so they come back if you grow it again. |
| One at a time | Starting a cart fades out everything else, whatever each cart's own "When another cart starts" says. |
| Stop all fade | How long Esc / Stop all takes to fade out (ms). |
| Global hotkeys | Hotkeys also work when another window is in front. |
| MIDI input | All MIDI inputs, or just one controller. Last received underneath shows each message as it arrives. |
| MIDI Stop all | Learn a pad that fades everything out, like Esc. |
| Load everything into RAM | Also loads tracks over 7 minutes into memory, so every button plays from RAM. The line underneath shows how much memory is in use. |
| End warning | How many seconds before the end a long track (30 s+) starts pulsing amber. It flashes red for the last 5 s either way. 0 turns it off. |
| Show button settings | Shows the mode / fade / "Others" labels on every button. Untick for a cleaner wall during a show; hovering still shows everything. |
| This bank | Auto-assign keys, Rename, Clear bank (empties every button; files untouched). |
| Palette set | Open… / Save as… / New… (see below). |
Saving & palette sets
- There's no Save button to forget. Every change (buttons, colours, keys, MIDI, volumes, banks, grid and settings) is saved within half a second, and once more when you close Show Player. Next time it opens exactly as you left it.
- If the PC crashes or loses power, at most the last half-second of changes is lost. Saving replaces the file in one step, so a crash can't leave a damaged palette, just the previous version.
- The right-click edit window is the one exception: its changes only count once you press Save. Closing it, pressing Esc or Cancel, or quitting the app with it still open drops them.
- Save as… (Ctrl+S) writes a .showset file: keep one per show, or copy it to another PC. Open… (Ctrl+O) loads one (old .jpal files open too).
- Sets store where the audio is, not the audio itself. On another PC the files need to be at the same paths, or they show the red "not found" outline.
- New… starts an empty palette, keeping your output device and master volume.
Instant playback
Show Player is built so a press is heard at once, every time:
- Carts up to 7 minutes, in every bank, are loaded into memory in the background. Pressing one plays straight from RAM, with nothing read from disk.
- Longer tracks are kept pre-loaded and ready to go.
- Each button shows where it plays from, next to its length: ⚡ RAM (instant), Disk (pre-loaded from disk, still fast) or ⏳ while it loads. Hover the label to see why a track isn't in RAM.
- Load everything into RAM (⚙ Settings) loads tracks of any length too, using up to 40% of the PC's memory. Settings shows how much is in use. Turning it off frees the long ones again.
- The status bar shows ⚡ all ready when every cart in the bank is loaded (with how many are in RAM and how many play from disk), or ⏳ loading… while it's still working. Check for ⚡ before the show starts.
Tips for a show:
- Keep the audio on the laptop's own drive, not a network share.
- A USB audio interface has much less delay than the laptop's built-in sound, and keeps the jingles off the speakers.
- Open Show Player a minute before you need it so everything is loaded.
- A ⚠ "file(s) not found" in the status bar means a cart's audio has been moved or renamed. Right-click it → Browse… to find it again.
Keyboard shortcuts
| Esc | Fade out everything |
| Shift+Esc | Stop everything instantly |
| Ctrl+1 … 0 | Go to bank 1–10 |
| PgUp / PgDn | Previous / next bank |
| Ctrl+S | Save palette set as… |
| Ctrl+O | Open palette set… |
| Ctrl+L | Live show mode on / off |
| Space | Music dip on every playing cart that has a dip button (see Music dip) |
| F1 | This help |
| Right-click a cart | Edit it |
| Right-click ⤵ | Set the fade time |
| Shift+drag a cart | Move / swap it |
| Drag a bank tab | Reorder the banks |